Table of Content
You’ll then be able to choose a more familiar name. If you’re looking to connect your Merkury light bulb without using Wi-Fi, there are a few things you’ll need to do. First, make sure that the power adapter is properly plugged into an outlet and your light bulb is screwed in tightly. Next, locate the reset button on the bottom of the power adapter and press it for three seconds. Tap “Merkury Smart Bulb” from the list of available devices and follow the on-screen instructions to connect it to your Wi-Fi network. Once connected, you should see a confirmation message in the app indicating that the bulb has been successfully added.
For example, use "Desk Light" instead of "Bedroom Desk Light." If you can't find your lights, force close the Google Home app and try again. You might not be a member of the home that the bulb was set up in. Ask the person who created the home to add you as a member. The bulbs must be turned on before you continue. To create or change a nickname, open the Google Home app .
Merkury smart bulb unboxing & setup
Likewise, you may need to set up a hub or bridge as well. You also have to check the smart light bulb’s specs, especially its compatibility with your device. Smart bulbs are bulbs that can be turned off and on by command or by an application. If you’re looking to connect your Merkury light bulb, there are a few things you need to know. First, make sure that your lightbulb is compatible with the Merkury bridge.
I see people on reddit homeassistant say the Tuya app works on a cell phone to add Merkury devices to HA. Press the “ ” button on the top right for advanced settings, and click Modify Device Name . Make sure your mobile device and your speakers and displays are linked to the same Google Account. Verify that the Google Account shown is the one linked to your Nest speaker or display. To switch accounts, tap another account or Add another account. Reboot the speaker or display you use to set up your bulbs.
How To Measure Recessed Lighting Size In Seconds
The color changing feature is great if you want to set the mood for a party or event. You can choose from 16 million different colors! One thing to note about the app is that it requires a 2.4 GHz Wi-Fi connection in order to work properly. Now, choose which type of lightbulb you have . For this example, we’ll use an A19 bulb. Follow the instructions in the app to connect your phone to the lightbulb via Bluetooth.
Geeni’s app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router. Make sure your speaker or display, and Philips Hue bridge, are on the same Wi-Fi network and connected to the same router. Factory reset your bulbs.Note that the reset sequence is different depending on your bulbs’ firmware version. If your bulbs don’t flash on and off 3 times after you finish the first reset sequence, you'll need to use the second reset sequence.
Connect Merkury Smart Bulb with Google Home
‘Hey Google, change lights to 2700 kelvins’ - To change the color temperature of your tunable white bulbs. ‘Hey Google, set lights to candlelight’ – To change your tunable white bulbs to sleep color. If you’re having trouble connecting your Merkury light bulb to your home’s Wi-Fi network, there are a few things you can try.
You should get a prompt about setting up your smart lights, during which your bulb might blink a couple of times. The app is available for both Android and iOS devices. The app allows you to do more than just turn the lights on and off. You can also dim the lights, set timers, create schedules, and even change the color of the light. Second, check to see if there are any other devices using the same frequency as your light bulb. If so, try disconnecting those devices and see if that clears up the connection issue.
Step-by-Step Guide to Link Lights to Google Home
Please make sure the voltage of the LED bulb is compatible with the main electricity of your country before connecting to a bulb holder. Ensure that the base of the bulb matches the bulb holder. This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, the device should be replaced. By following these simple steps, you can easily reset your Merkury light bulb whenever you need to. Once the app is installed on your phone, open it and follow the instructions for pairing your lights with Bluetooth.
If your bulb has color options, you'll also find color controls. Now, select your bulbs for each room. They should all blink once selected. You should now see the lights available.
Similarly, it is important to mention how there will be certain instructions that you might have to follow on-screen. Google Home offers a great way of being able to control all the smart lights in your house. Using a single app, you can have complete control over all compatible smart appliances. Though before you can use any of the devices, you will first have to connect it with Google Home.
You will need the ‘Tuya’ app, yes the bulbs are ‘Merkury’ and use the ‘Geenie’ app, but you must set up with the ‘Tuya’ app. If the bulbs were already paired to the Geenie app, they need to be removed from the app and factory reset . These bulbs, along with the Merkury smart switches are both on sale for Black Friday and Cyber Monday for $9.99. Maybe if me spread the word it will help attract attention. The switches are normally $19.99 so that’s the value.
This is why we recommend not adding a name similar to your room name as it can interfere with the voice commands. Now that you know how to set up a smart light bulb with Google Home App, you need to learn how to rename it. ‘Hey Google, set lights to bright white’ – To change your Tunable white bulbs to a vibrant color’.
Merkury bulbs are compatible with 2.4GHz networks only. Get your phone out and connect to a 2.4GHz WIFI network. Trust us a 5 GHz won’t work with the merkury bulbs, we have tried that. Then open the Geeni app on your smartphone.
No comments:
Post a Comment